Turn-key palm oil processing plant project
Palm oil processing plant is a complicated project which include a series of processes.We can provides a range of palm oil processing plant to extract oil from fresh fruit bunches of oil palm. And we can design customized palm oil processing plant based on customer needs and cost require. In general,we can supply palm oil processing plant with capacity 1-120tph.
Factory layout of turk-key palm oil processing plant
Oil palm belongs to palmaceous plant; It is mainly distributed in tropic area and some sub-tropic areas; It is one of the most important tropic oil seed plants in the world . The oil rate in oil palm is very high: generally 46～50％ in the fresh pulp , and 50～55％ in palm kernel. Due to this characteristic of palm fruit, building a palm oil mill plant is a profitable industry for investors.
The oil content of each part
The process of palm oil processing plant:
Raw Materials Storage Section of Palm Oil Processing Plant: Collecting the ripe fresh palm fruit bunches from the plantation and transported by trucks, then pour the FFB into the discharge door after weighed by weighbridge.
The discharge door has discharging channels, the upper and lower switches of the iron gate are controlled by pneumatic control system consists of air compressor and pneumatic control devices. Start the control valve to open the gate of the discharge door, then the palm fruits will fall into the fruit basket car or conveyor.
Palm fruit reception section
Sterilization Section of Palm Oil Processing Plant: sterilization is a process in palm oil processing plant that injecting 300KPa direct steam into to sterilizer to boil the palm fruit for about 60 mins.The purpose is to break the enzymes in fruit, and to avoid the increasing of the FFA content in oil. At the meanwhile, the high temperature will makes the fruits soften, it is easy for fruit threshing and kernel cracking. Also reducing the damage of kernel.
Palm fruit sterilizing machine
Threshing Section: Oil palm fruit accounted for about 60% of the whole fruit bunch, The purpose of threshing in palm oil processing plant is to separate the palm fruit from the FFB. The drum type thresher is the common machine used to separate the fruit. There is a horizontal turning machine inside of the threshing machine. The separated oil palm fruit is sent to the pressing section. Empty palm fruit bunches are transport to the yard from the other side of the thresher drum, or transported from the factory as palm plantation slipcover to recycling use, or burning directly as fertilizer for agricultural land.
Palm fruit threshing machine
Digesting is for breaking off the palm fruit, and with high temperature to soften the fruit and kills the bacteria. Sterilizing, threshing and digesting all help increase the palm fruit oil yield.
Inside the digester, there are baffles and stirring arms, under the driving of the top motor, baffles break off the palm fruit and heat the palm fruit, so it can pressing oil easily.
Pressing machine use hydraulic control system to adjust spacing between screws. So it is suitable for various palm fruit species and guarantee the oil yield. After pressing, the crude palm oil needs to be purified, the kernel and fiber impurities can be processed by further separation from the pressed cake. After drying, the kernel is stored for deep process, and the separated fiber and shell are used as the boiler fuel for providing steam.
Palm fruit digesting & pressing machine
Advantages: Use latest technology; Guarantee the oil quality; Reduce palm oil processing plant investment; Lower oil loss.
The purified palm oil can be directly sold or deeply refining. After clarification, the industrial sewage will be sent into effluent pond. Then the residual sludge can be used as the fertilizer. The whole palm oil processing process is high automatic, environment friendly and energy- saving.
Palm oil clarification machine
Palm Kernel Recovery Section of Palm Oil Processing Plant:
Pressed cake is transported into the fiber separation air net and nut polishing drum for fiber&nut separating. There are some fiber covering outside palm nut. In order to get palm kernel, we should remove the fiber and shell first.
The cracked palm nut adopts separating column system and special hydrocyclone equipment to separate palm kernel and shell according to their different density. So it has high separation rate.
After separation, the shell is used as boiler fuel; the moisture content of separation kernel is less than 7% after drying through the hot air. Dried kernel can be sent to kernel storage silo or warehouse for storage.
Palm kernel recovery machine
We are professional manufacturer of palm oil processing plant.We provide high quality palm oil processing plant as well as free and skilled technical guidance! Supply various kinds of palm oil processing plant solutions for palm oil mill plant depends on your customized demands. Premium equipment for palm oil extraction and crude palm oil refinery.
Leave A Message
If you want to know more information about Turn-key palm oil processing plant project. pls kindly leave your phone number, We will back to you ASAP once we got your message.
- How to start a palm oil milling and processing plant?
- How to start a palm oil processing business in nigeria?
- How to produce refined vegetable oil from palm kernel oil?
- What are the steps in palm oil production?
- Why is palm oil refined? What is the purpose of palm oil refining?
- Is there a way that I can calculate the capacity of palm oil mill that I need for my oil palm plantations?
- What is the difference between a batch refinery, semi-continuous refinery, and continuous refinery?
- How to refine palm kernel oil? How to purify palm kernel oil?
Leave a message