How can I get palm kernel oil in a palm kernel oil processing plant?

To obtain palm kernel oil from palm nut, it needs to go through the equipment of palm oil processing plants. A complete palm kernel oil processing plant starts from the palm nut and goes through fiber separation equipment, kernel shell separation system, crusher, cooker, palm kernel oil press and filtration, and finally gets crude palm kernel oil.

Palm oil processing plants

The following describes how to obtain palm kernel oil from a complete palm kernel oil processing plant step by step.

First of all, to obtain clean palm nut, it is necessary to use fiber separation equipment to remove external fibers to obtain clean palm nut.

Then we need a palm kernel nut cracking and shell separator which is one of our company's hot selling products in the palm kernel oil processing plant. The kernel shell separation system includes the core air separation unit of the cracker. The cracker effectively removes the palm kernel shell from the nut. The mixture of palm kernel and palm shell is separated by winnowing separator according to the weight of the raw material, so as to obtain clean palm kernel.

Palm kernel nut cracking and shell separator

After we get clean palm kernel, we use a crusher to break them into small pieces in order to better squeeze and extract oil, reduce the pressure of the oil press during pressing.

The next step is to use a cooker, and the purpose is to optimize the temperature and humidity of the kernels before pressing to improve the oil yield. This is a very important step before pressing. If the capacity is small, you can use a drum pot. There are three types: firewood, electricity, and gas. If the capacity is large, you can use a vertical steamer.

Then use palm kenrel oil press to press which is essential step in palm kernel oil processing plant. Palm kernels are very hard, and our screw are squeezed using the short two-pole pressing process, which is more suitable for hard oil seeds. Also too long pressing time will lead to paste, so we specially designed to ensure high oil yield, but also to avoid pasting. Our squeeze screw is forged with No. 45 steel, forged and dipped in fire, with high hardness. There are some ordinary carbon steel on the market, the service life is very short.

Palm kernel oil press machine

Finally, the plate filter is the most commonly used. It removes the impurities in the crude palm kernel oil by pressing, and then filters out part of the water. At this point we have clean palm kernel oil.

The above shows how can get palm kernel oil from a complete palm kernel oil processing plant step by step. Recently, many customers have begun to pay attention to the palm kernel oil market, and will start to invest in palm kernel oil industry. If you also have needs, please contact me.